Multipoint Nozzle

HMP multi-nozzles incorporate MX series edge Copper + Beryllium Ti + Zr or for conveying heat to the same injection sites. To inject materials used unburdened Copper + Beryllium and when there are loads of fiber is used Ti + Zr.

In both applications, horizontal and vertical in the MX is performed 2 to 6 points multicavity imprints.

With the injection-side contribute to lower costs. This type of injection allows us to perform with wall thicknesses from 0.4 mm.

HMP manufacture fully adapted to customer needs.

This catalog is delivered so they can get information about our products, but manufacturing HMP our policy is to maintain direct contact with the moulder and moulder that implanted our system and thus be able to answer any questions that may arise.

HMP has technical department designing the manifold completely adapted to the dimensions of the workpiece, weight, material and dimensions of the mold, each chamber being different depending on the needs of injection.

The interior channels are designed and sized for inside corners are not that may contaminate the thin piece.

The finishes are rectified by getting a completely clean database, preventing any possible leakage of material.

All other parts of the manifold are a standard offering immediate delivery.

The materials used in our blocks are of high quality.

The heaters are inserted into the manifold, being configured as a compact block.